[Elecraft] K3 Fans with the 100w kit.
Eric Swartz - WA6HHQ, Elecraft
eric at elecraft.com
Thu Oct 16 00:06:00 EDT 2008
Scott was mistaken. All K3s pull air in through the top, across the PA heat sink, and blow it out the rear.
73,
Eric
_..._
-----Original Message-----
From: Missouri Guy <n0tt1 at juno.com>
Date: Wednesday, Oct 15, 2008 8:03 pm
Subject: Re: [Elecraft] K3 Fans with the 100w kit.
To: wrcooke at flash.net, Elecraft at mailman.qth.net
OK, thanks Willis. I asked "Scott" at Elecraft and
he said his (at the shop) was flowing out the top.
It's hard to tell without a "flag" near the input-outputs.
73,
Charlie, N0TT
On Wed, 15 Oct 2008 16:46:08 -0700 (PDT) WILLIS COOKE <wrcooke at flash.net> writes:
The same way yours is. The air is supposed to flow out the back.
Willis 'Cookie' Cooke
K5EWJ
--- On Wed, 10/15/08, Missouri Guy <n0tt1 at juno.com> wrote:
> From: Missouri Guy <n0tt1 at juno.com>
> Subject: [Elecraft] K3 Fans with the 100w kit.
> To: Elecraft at mailman.qth.net
> Date: Wednesday, October 15, 2008, 4:40 PM
> Gents,
>
> The fans in my new K3 blow warm/hot air out the back
> instead of through the slots on top of the cabinet.
> That doesn't seem logical.
>
> I verified the postion of the red and black leads
> and they are plugged in as directed, with the
> RED leads being on the LEFT as viewed from
> the BACK of the cabinet. The fans are also
> installed correctly, with their labels on the OUTSIDE.
>
> I checked the air flow with a piece of paper....just
> checking with my hands wasn't 100% conclusive.
>
> Which way is the air flowing in/out of your k3/100?
>
> Thanks,
> Charlie, N0TT
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
More information about the Elecraft
mailing list