[Elecraft] K2 problem

[Don Wilhelm]

Ian,

Is it possible that you plugged the KDSP2 in with the pins offset from 
the headers?  That would kill the audio in your K2.
If you find no simple answer, unplug the KDSP2 and bend a couple of 
component leads to fit between the 2 control board headers - J1 pin 1 to 
J2 pin 1, and J1 pin 2 to J2 pin 2.  No need to solder them in, just 
push the wire ends into the headers and 'presto', you have created an 
'unmodule' - it works for me that way.

73,
Don W3FPR

Ian Maude wrote:
> Hi all,
> Well I thought I would have another go at calibratign my K2 after a 
> couple of years and I have broken something.  I have no RF audio.  
> Sidetone is fine and I get a click on switch on.  I suspect the KDSP 
> board.  I do not see the LED at all on switch on and the K2 does not 
> think it is installed.  Is there an easy way to take it out of circuit 
> physically to narrow the search please?
>
> 73 ian
>