[Elecraft] [K3] VFO A tracks VFO b, Help

[Greg - AB7R]

This is a high priority and Wayne is working on it now.  But it is NOT a trivial matter 
and requires a lot of code.  When it's ready it will be announced on the reflector.


-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Tue Oct 14 13:22 , "Igor Sokolov"  sent:

>What a surprise! Cross band operation with 2 VFO is implemented even in my 
>IC7000. I thought it is available in K3 as well especially with 2 complete RX 
>build in.
>Well I hope it will not take long to update the firmware to implement this 
>feature because my K3 with KRX3 is on the way here and I was intending to use 
>these 2 receivers to monitor 2 bands simultaneously.
>\
>73, Igor UA9CDC
>
>
>> Ted,
>>
>> It has always worked like that.   If you previously had VFO A and VFO B 
>> showing different bands, I would think you had a display problem.
>> Currently even with the KRX3 installed, cross-band operation is not yet 
>> implemented in the current firmware, but is being addressed as a planned 
>> future firmware addition (only for those with the KRX3).
>>
>> 73,
>> Don W3FPR
>>
>> wa6riv wrote:
>>> I updated my firmware and caused a problem. I have not purchased a sub 
>>> receiver and is not installed.
>>> When I'm in VFO A, and do a band change, VFO B follows the same band.
>>> I can swap A=>B or B=>A, move from A to B or B to A.
>>> But I can't have VFO A on 40 meters and VFO B on 20 meters.
>>> The Band switch transfers both VFO's to the same band at the same time.
>>>  What have I done?  Tnx Ted 
>>> WA6RIV ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Elecraft mailing list
>>> Post to: Elecraft at mailman.qth.net
>>> You must be a subscriber to post to the list.
>>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>>  http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/subscribers.htm
>>> Elecraft web page: http://www.elecraft.com
>>> ------------------------------------------------------------------------
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - http://www.avg.com Version: 8.0.173 / Virus Database: 
>>> 270.8.0/1722 - Release Date: 10/13/2008 7:50 AM
>>>
>>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com 
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com