[Elecraft] K3 Mini plug/jack mis-contact

[Don Wilhelm]

Aki,

There should be no difference in the various mini-plugs as long as they 
are the 3.5mm type.  If you are using a 2.5mm, it might work for a 
while, but will be loose in the jack and will not make good contact.

If you do have a 3.5mm plug and it is loosing contact, check to be 
certain the jacks protrude through the rear panel sufficiently.  If the 
KIO3 module is not properly seated, the jacks will be recessed and will 
cause the problem you seem to be having.

73,
Don W3FPR

a.yoshida wrote:
> I sometimes find that mini plug/jack on the back panel makes
> mis-contact. (Line in/out, Speaker etc)
> Is there recomended mini plug ?
>
> 73
> aki  ja1nlx
>
>