[Elecraft] K3 Noise Gate

[Joe Subich, W4TV]

> ERR TXF message

Incorrect transmit filter setting.  Unless you have the FM 
filter installed as FL 1, configured for 13 KHz and selected 
for FM transmit, you cannot transmit FM.  Unless you have the 
6 KHz (AM filter) installed, properly configured as 6 KHz, and 
selected for AM transmit, you can not transmit on AM. 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Roy Davis
> Sent: Sunday, October 12, 2008 1:50 PM
> To: Elecraft
> Subject: Re: [Elecraft] K3 Noise Gate
> 
> 
> Hello All,
> 
> Has anyone experienced the following;
> 
> ERR TXF message -  when transmitting on FM and AM modes.  
> When you key up the message appears, and as long as you hold 
> the key down, you can transmit.  But after releasing the key, 
> it will not transmit again in the mode.  You can reset the 
> radio by moving to a different mode.
> 
> Is it possible in my inital setup I missed turning on a 
> parameter?  I have looked in the menu, but I do not see where 
> I made a mistake.
> 
> Thanks,
> 
> Roy - WK4Y
> # 01366
>