[Elecraft] K2 Low/No pwr out on SSB except 80 and 40m

[Catherine Flick & Stewart Fletcher]

K2 gurus:
I have a K2 with 160m mod, DSP, NB
Into a dummy load, I have good power out on all bands in TUNE, and CW Mode.
In L/USB I ONLY have good power out on 80 and 40m determined by the whistle test and weekly check-ins to several nets(LSB only)
Other bands are either very low or 0 watts out.
I just finished the tx alignment procedure in manual.

Any ideas?
I have very little experience/knowledge of what is going on here.

Thanks
Stewart - KE7LKW
stewart at gorge.net
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20081011/8f4dbaff/attachment.htm