[Elecraft] big problem

[Dick Hanson]

Morning, Don.....
I had the same problem.
I had not installed the clips properly in the connector. By this, I mean
that I had not pushed the metal clips far enuff forward for them to "snap"
into a locked position. Because of this, they would cause the connector to
disengage with the slightest movement of the radio.

Look at the assy manual very carefully with the connector in hand.
I believe you'll see this is your problem.

Good luck.
73
Dick, K5AND  00050

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of W2XB
Sent: Friday, October 10, 2008 6:40 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] big problem


Good morning all,
Have a super big problem with the K3 :-)  Every time I move the K3 the power
plug falls out. Changed the connectors and still comes out with the
slightest movement of the rig.
Any suggestions on keeping it snug. Tried tweaking the contacts with no
luck.

Don...w2xb

Not really a problem just a little annoying.
-- 
View this message in context:
http://n2.nabble.com/big-problem-tp1316022p1316022.html
Sent from the Elecraft mailing list archive at Nabble.com.

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com