[Elecraft] PTT-KEY setting for use with Writelog and DX4WIN

[Roger Marrotte]

I've been trying different DTR and RTS settings (CONFIG|PTT-KEY) to get PTT
and CW to work with a serial port connecting my computer to my K3.  In
particular I've been trying to get Writelog and DX4WIN to work. I'm using a
real serial port and a serial cable with all pins connected.  The cable/port
works fine for communications with the radio.  Using various settings of
PTT-KEY and various setting for Writelog and DX4WIN, the rig goes into
transmit sometimes but does not sent CW.  I've searched old emails and so
far nothing is working.  So, if anyone has this working for Writelog and/or
DX4WIN, I'd appreciate if you could give me know good settings or some
advice in general.  It seems simple to do but I can't get it to work.  I had
all this working with a microham micro keyer but I want to try this
"simpler" approach.
 
Thanks,
 
Roger, W1EM
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20081005/6d5b6278/attachment.htm