[Elecraft] K3 - 60M channel storage and recall

[k6te Wim]

Wayne,

here's perhaps an idea: the K3 should load the memory as soon as you hit
M->V button, then
as you tune VFO-A it will load each memory number as you spin the VFO ...
This allows to receive on that memory as you spin it

- Wim


wayne burdick wrote:
> 
>> ...unlike most other transceivers the K3 currently lacks ability to 
>> switch stored channels (with instant receive) in the manner of a 
>> crystal controlled transceiver.
> 
> Julian, Dave, Tony:
> 
> I'm not sure I understand what you're asking for. The K3 lets you 
> designate any number of variable-length blocks of channelized frequency 
> memories, then use VFO A to instantly hop among them. You can also do 
> channel-hop scanning within one of these blocks.
> 
> For example, I have memories 61-65 set up as a channel block for the 
> five U.S. 60-m frequencies. From any band, I can simply recall one of 
> these memories, and the VFO becomes a "channel" control, just as if the 
> rig were crystal-controlled.
> 
> Similarly, I have a block set up for 2-m repeaters, etc.
> 
> Am I missing something?
> 
> If so, feel free to explain exactly how you'd like the K3 to function 
> in this regard. The present method is simple and easy to use, but I'm 
> open to other suggestions.
> 
> This is all described in the Owner's Manual (page 39). See "Channel 
> Hopping."
> 
> 73,
> Wayne
> N6KR
> 
> 
> ---
> 
> http://www.elecraft.com
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
> 

-- 
View this message in context: http://n2.nabble.com/K3---60M-channel-storage-and-recall-tp1142319p1213071.html
Sent from the Elecraft mailing list archive at Nabble.com.