[Elecraft] Problem with new firmware dowload

[Bob Tellefsen]

Hi Dave and Vic and Brett and Toby

Finally figured out the problem.
I had the downloaded zip file in C:\K3 Utility\beta 2r45
but when I unzipped it, it created a new subfile,
C:\K3 Utility\beta 2r45\k3fw2r45.zip.  I finally copied
the contents of this file back into C:\K3 Utility\beta 2r45
and things started to work.
Whew!  At least I was able to muddle through.  That's
what I get for downoading infrequently.

I appreciate everyone's input.  We finally got it together.

Thanks and 73
Bob N6WG
The Little Station with Attitude
  ----- Original Message ----- 
  From: David F. Reed 
  To: Bob Tellefsen 
  Cc: Reflector Elecraft 
  Sent: Wednesday, October 01, 2008 2:04 PM
  Subject: Re: [Elecraft] Problem with new firmware dowload


  Bob,

  Go back and try again.

  I think you are looking at the wrong menu item; you are seeing CONFIG TXGN HP or LP, and the number; go counterclockwise from there (B knob) 2 steps, to CONFIG TX GATE; it will show on or off, and the level of it...

  73 and Good Luck de Dave, W5SV



  Bob Tellefsen wrote: 
    Just did the new firmware dowload, and trying to
    set up the new Transmit Noise Gate.
    Problem is:
    Directions say got to CONFIG:TX GAIN and tap
    1.  I only show CONFIG:TXGN LP, with a current setting
    of 18.  No response when tapping 1.

    What do I do now?

    Thanks and 73
    Bob N6WG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20081001/c1927c8a/attachment.htm