KE7X RE: [Elecraft] KAT3 Problem

[Ken K3IU]

Put the KAT3 in BYPASS mode, press and hold TUNE (not ATU TUNE), read 
display.
73,
Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cranz Nichols wrote:
> Fred:
>
> "native swr, as measured by the K3, is..."
>
> How did you get the K3 to measure the native SWR numerically?
>
> That is exactly what I need to do - on another project.
>
> cln
> WB5BKL
>
> ----- Original Message ----- > ------------------------------
>>
>> Message: 7
>> Date: Tue, 30 Sep 2008 06:26:32 -0600
>> From: "Cady, Fred" <fcady at ece.montana.edu>
>> Subject: RE: KE7X RE: [Elecraft] KAT3 Problem
>> To: "Gary Surrency" <gary at elecraft.com>
>> Cc: elecraft at mailman.qth.net
>> Message-ID:
>> <A15F7F22B01D1449AD4D685B1EFED5AF6135E6 at coeexch2.coe.montana.edu>
>> Content-Type: text/plain; charset="us-ascii"
>>
>> Thanks Gary,
>> I redid the power calibration and the tuner tunes the dummy load all ok.
>> It still struggled with the 40 dipole (native swr, as measured by the
>> K3, is 1.6:1) 
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20081001/370c157a/attachment.htm