[Elecraft] K2 AGC Threshold Setting

[Ken Mohler]

OK guys, now I need some guidance.  I'm building K2 serial number 6625.  I
am on page 48 on the manual, Setting the AGC Threshold.  I have the RF GAIN
control fully clockwise.  The highest voltage reading I can get on pin 5 of
U2 while adjusting R1 is 3.65V.  The manual calls for 3.80V.  All tests up
to this point have been completed successfully.  Any ideas or suggestions?

Your help is appreciated.

Ken
K0WKM