[Elecraft] K3 Split Rtty ops?

[Joe Subich, W4TV]

> * SPLIT COMBINATIONS AVAILABLE: Cross-mode SPLIT operation is 
> possible with any combination of CW and SSB for VFO A and B. 
> Same-mode SPLIT is possible in all modes except PSK-D.

Well, CW in Voice does not work with both VFOs in SSB and 
split selected for me in 2.67.  That's what I was using to 
check Ed's report.  I have never been able to make "CW in 
Voice" work when split. 

73, 

   ... Joe, W4TV 
 
 



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Lyle Johnson
> Sent: Wednesday, November 26, 2008 8:02 PM
> To: microham at microham-usa.com
> Cc: elecraft at mailman.qth.net; 'TMorton'
> Subject: Re: [Elecraft] K3 Split Rtty ops?
> 
> 
> >> This was fixed in MCU 2.60.  Here is an excerpt from the release 
> >> notes
> >> document:
> >>
> >> MCU 2.60 / DSP 1.94, 10-29-2008
> > 
> > That's not in the public code line and does not work with the
> > public beta (MCU 2.67 / DSP 1.96, 1118-2008). 
> 
> The notes in the public beta under 2.63/1.95 indicate
> 
> * SPLIT COMBINATIONS AVAILABLE: Cross-mode SPLIT operation is 
> possible with any combination of CW and SSB for VFO A and B. 
> Same-mode SPLIT is possible in all modes except PSK-D.
> 
> I just tested this in  my current development code, MCU 2.70, 
> DSP 1.98 
> and verified FSK-D works in split while PSK-D does not, 
> confirming this 
> note.
> 
> --
> 
> Often field test code releases get rolled up into public beta 
> releases, 
> so the 2.60 features, while not listed separately, are 
> included (unless 
> the feature doesn't work, of course :-)
> 
> 
> 73 and Happy Thanksgiving,
> 
> Lyle KK7P
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com