[Elecraft] Order is in! Also Shure 444 question

[Jim Brown]

Shure has made various versions of the 4xx-series mics over the 
years, and they publish data sheets for their products on their 
website. The 444 is a dynamic mic, and the versions I've seen can be 
wired either balanced or unbalanced, switch can be wired various 
ways. Check your collection of product data/instruction sheets for 
color codes, switch wiring, etc. The 444 should work wonderfully 
with a K3. Because it has its own 3 kHz emphasis, you don't need to 
add it (or as much) with TXEQ in the K3. I would, however, roll off 
some low end (that is, cut the lower three octaves in TXEQ). 

The K3 works well with VOX or with PTT. Take your pick. 

73,

Jim K9YC

--Original Message Text---
From: Benson
Date: Wed, 26 Nov 2008 10:04:27 -0500

Is anyone on the list using the Shure 444 desk mic with the K3?-  
Can you share some wiring and/or rig setup tips?



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20081126/53be7349/attachment.htm