[Elecraft] K3 variable power output

[Bob Towers]

Many thanks to Mike, N5WNG, and Jeff, W7BRS, for comments.

I'm measuring the output power on an external power meter and the 
internal power meter is pretty well spot on. I have a KAT3 and I've been 
doing the ATU TUNE (10W) before I key at 50W or whatever.

I noticed that the PA TEMP was set quite high (27 deg C) so I turned it 
down to 22.

I've just upgraded the firmware to 2.63 and it hasn't solved the problem!

73

Bob MM0RKT