[Elecraft] K3 & Logic 8

[Brendan Minish]

Dxbase as shipped has k2 support that does this in the right order for
the k2/k3 and all of the rig control features of Dxbase work correctly
with the K2/K3. 
With DXbase 2007 there are no known issues with the k2/k3  

I have a k3 file done for it too, at the moment it's only a cosmetic
rewrite of the k2 file since the k2 file fully supports all DXbase
features on the k3. 
Anyone with older versions of Dxbase can get the updated radio config
files from me 

73
Brendan EI6IZ 

On Wed, 2008-11-26 at 01:34 -0500, Joe Subich, W4TV wrote:
> Greg, 
> 
> > I've tried to work with Dennis on this and he made an attempt 
> > but it did not fix the problem and he did not want to persue 
> > it further.  I was pretty disappointed.
> 
> I suspect Logic is another of those logging programs that send 
> the mode before the frequency.  I suppose I'll dig out a copy 
> and the serial port monitor one of these evenings to confirm 
> that.  Perhaps I'll even run through all of the logging programs 
> that I have for support purposes and document those that will 
> have problems with the K3 (known issues: DXBase, DX4Win, AClog 
> and Win-EQF so far). 
> 
> 73, 
> 
>    ... Joe, W4TV 
>    
> 
> 
> 
> > -----Original Message-----
> > From: elecraft-bounces at mailman.qth.net 
> > [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Greg
> > Sent: Tuesday, November 25, 2008 10:10 PM
> > To: Phil and Christina; Gary at doctorgary.net; elecraft at mailman.qth.net
> > Subject: RE: [Elecraft] K3 & Logic 8
> > 
> > 
> > There's a problem when clicking on spots in Logic 8.  I often 
> > find it necessary to click the spot two times.  The first 
> > time sets the freq OK but it does not always set the mode.  
> > Clicking a spot a second time sets the mode.
> > 
> > I've tried to work with Dennis on this and he made an attempt 
> > but it did not fix the problem and he did not want to persue 
> > it further.  I was pretty disappointed.
> > 
> > 73
> > Greg
> > AB7R
> > 
> > 
> > -----Original Message-----
> > From: elecraft-bounces at mailman.qth.net 
> > [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of Phil 
> > and Christina
> > Sent: Tuesday, November 25, 2008 6:57 PM
> > To: Gary at doctorgary.net; elecraft at mailman.qth.net
> > Subject: RE: [Elecraft] K3 & Logic 8
> > 
> > 
> > I use Logic 8 with my K3.  Choose the K2 setting, but it 
> > works fine.  Reads radio data as you log and allows some rig 
> > control from the program too.  I don't do anything fancy with 
> > it, but it seems fine for the basic operations. Logic 8 also 
> > has contest log forms for many contests.  I used the SS form 
> > for the SSB contest recently.
> > 
> > Phil
> > NS7P
> > 
> > -----Original Message-----
> > From: elecraft-bounces at mailman.qth.net 
> > [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of Gary Smith
> > Sent: Tuesday, November 25, 2008 6:43 PM
> > To: elecraft at mailman.qth.net
> > Subject: [Elecraft] K3 & Logic 8
> > 
> > 
> > My official hi to the group,
> > 
> > I just placed my order for a K3 today so the gears are in motion.
> > 
> > Anyone using Logic 8 with the K3? It looks like Logic is set 
> > up for the K2 but I didn't see anything for the K3.
> > 
> > Or are the commands the same for both K2 & K3?
> > 
> > Thanks!
> > 
> > Gary
> > KA1J
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):  
> > http://mailman.qth.net/mailman/listinfo/elecraft
> > 
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
> > 
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):  
> > http://mailman.qth.net/mailman/listinfo/elecraft
> > 
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
> > 
> > _______________________________________________
> > Elecraft mailing list
> > Post to: Elecraft at mailman.qth.net
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):
> >  http://mailman.qth.net/mailman/listinfo/elecraft    
> > 
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
-- 
Don‘t complain. Nobody will understand. Or care. And certainly don‘t try
to fix the situation yourself. It‘s dangerous. Leave it to a highly
untrained, unqualified, expendable professional.