[Elecraft] K3 & Logic 8

[Joe Subich, W4TV]

Greg, 

> I've tried to work with Dennis on this and he made an attempt 
> but it did not fix the problem and he did not want to persue 
> it further.  I was pretty disappointed.

I suspect Logic is another of those logging programs that send 
the mode before the frequency.  I suppose I'll dig out a copy 
and the serial port monitor one of these evenings to confirm 
that.  Perhaps I'll even run through all of the logging programs 
that I have for support purposes and document those that will 
have problems with the K3 (known issues: DXBase, DX4Win, AClog 
and Win-EQF so far). 

73, 

   ... Joe, W4TV 
   



> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Greg
> Sent: Tuesday, November 25, 2008 10:10 PM
> To: Phil and Christina; Gary at doctorgary.net; elecraft at mailman.qth.net
> Subject: RE: [Elecraft] K3 & Logic 8
> 
> 
> There's a problem when clicking on spots in Logic 8.  I often 
> find it necessary to click the spot two times.  The first 
> time sets the freq OK but it does not always set the mode.  
> Clicking a spot a second time sets the mode.
> 
> I've tried to work with Dennis on this and he made an attempt 
> but it did not fix the problem and he did not want to persue 
> it further.  I was pretty disappointed.
> 
> 73
> Greg
> AB7R
> 
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of Phil 
> and Christina
> Sent: Tuesday, November 25, 2008 6:57 PM
> To: Gary at doctorgary.net; elecraft at mailman.qth.net
> Subject: RE: [Elecraft] K3 & Logic 8
> 
> 
> I use Logic 8 with my K3.  Choose the K2 setting, but it 
> works fine.  Reads radio data as you log and allows some rig 
> control from the program too.  I don't do anything fancy with 
> it, but it seems fine for the basic operations. Logic 8 also 
> has contest log forms for many contests.  I used the SS form 
> for the SSB contest recently.
> 
> Phil
> NS7P
> 
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net]On Behalf Of Gary Smith
> Sent: Tuesday, November 25, 2008 6:43 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 & Logic 8
> 
> 
> My official hi to the group,
> 
> I just placed my order for a K3 today so the gears are in motion.
> 
> Anyone using Logic 8 with the K3? It looks like Logic is set 
> up for the K2 but I didn't see anything for the K3.
> 
> Or are the commands the same for both K2 & K3?
> 
> Thanks!
> 
> Gary
> KA1J
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):  
> http://mailman.qth.net/mailman/listinfo/elecraft
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):  
> http://mailman.qth.net/mailman/listinfo/elecraft
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com