[K3] [Elecraft] Loud audio blast on power up

[Shep Brokaw - W2BSB]

Chuck-
I have the same problem. It started with V2.57. How do I reload "data
tables" ? 
Thanks
Shep - W2BSB



Chuck - AE4CW wrote:
> 
> I had this problem long ago; a reload of the firmware AND the data tables
> cured it.  The trick was the data tables.  Thanks to Gary at Elecraft.
> 
> Chuck, AE4CW
> 
> 
> Monty Shultes wrote:
>> 
>> Mike -
>> 
>> I have a similar phenomenon, but it's a "soft blast", a burst of low
>> audio 
>> as the radio turns on, followed by normal operation.  Last 2 firmware
>> loads 
>> exhibit this.
>> 
>> I had a loud blast once before.  Try reloading all the software and data 
>> tables, that fixed it for me.
>> 
>> Monty  K2DLJ
>> 
>>> When I turn the rig on there is a momentary loud blast from the
>>> speakers. 
>>> It
>>> lasts maybe 250 milliseconds and then everything is normal. I get the
>>> phenomena when in CW, data, SSB modes. I do not see it show up in AM.
>> 
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>>  http://mailman.qth.net/mailman/listinfo/elecraft    
>> 
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>> 
>> 
> 
> 

-- 
View this message in context: http://n2.nabble.com/Loud-audio-blast-on-power-up-tp1567485p1569219.html
Sent from the [K3] mailing list archive at Nabble.com.