[Elecraft] K3: Keying SB-200

[Jeff Wandling W7BRS]

I installed this Harbach kit on two SB-200s I have.  It takes very little 
time and the peace of mind is worth it.  You might as well install the 
soft-start and soft-key mods at the same time - they go roughly into the 
same place on the underside of the SB-200.

Pictures:  http://w7brs.com/sb200

Works fine on my K3.

--
Jeff Wandling DE W7BRS K3 #2105     http://w7brs.com/k3
jw at w7brs.com

On Sat, 22 Nov 2008, GM4KGK wrote:

>
>
>
> Ralph Parker wrote:
>>
>> I'm just about to connect the KEY OUT to the SB-200 relay.
>> I hope the little transistor in the K3 can take it!
>>
>> VE7XF
>>
>
> I can thoroughly recommend Harbach Electronics' SK-201 keying kit for the
> SB200.
> Easy to fit and doesn't break the bank. Reduces keying requirements to about
> a volt at 1.5mA and you can use it with any rig.
> http://www.harbachelectronics.com/main/page_products_sb200__sb201.html
>
> I have no connection with the company.
> 73
> Norman - GM4KGK
> K3 #1139.
>
> --
> View this message in context: http://n2.nabble.com/K3%3A-Keying-SB-200-tp1565952p1566545.html
> Sent from the Elecraft mailing list archive at Nabble.com.
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>