Fw: [Elecraft] Interfacing K3 to TenTec QSK Amplifiers/AutomaticAntenna Tuner

[Tim Heasman]

----- Original Message ----- 
From: "Tim Heasman" <tim at sideswiper.plus.com>
To: <K2TK at att.net>
Sent: Thursday, November 20, 2008 8:59 PM
Subject: Re: [Elecraft] Interfacing K3 to TenTec QSK 
Amplifiers/AutomaticAntenna Tuner


> Hi All,
>
> Connect a keyer to key in on the Titan and use key out from the Titan to 
> key the K2.  There will be no timing problems doing it that way.
>
> 73
>
> Tim
>
> gm4lmh
>
> ----- Original Message ----- 
> From: "Bob" <K2TK at att.net>
> To: "Ben Horton" <whorton at cablelynx.com>
> Cc: <Elecraft at mailman.qth.net>
> Sent: Thursday, November 20, 2008 8:30 PM
> Subject: Re: [Elecraft] Interfacing K3 to TenTec QSK 
> Amplifiers/AutomaticAntenna Tuner
>
>
>> Please post answers to the list .
>>
>> I'm hopeful to get a Ten Tec Titan II model 416 interfaced to a K2 before 
>> the CQWW CW contest.  So information on the below combination may also be 
>> helpful to me.  Unless someone has experience with my combination. 
>> Information on it would be appreciated!!
>>
>> I'd sure miss the Break-In operation after years with it on my TS930 & 
>> SB220 or Ameritron AL811 with QSK5( used on 160 only).
>>
>> Thanks....
>>
>> 73,
>> Bob
>> K2TK
>>
>> Ben Horton wrote:
>>
>>> After completing my new K3 I am now anxious to interface it to my TenTec 
>>> Titan model 425,  Hercules II model 420, and Automatic Antenna Coupler 
>>> model 253. Of course with the two amplifiers I have built a black box 
>>> switching unit that will only allow one amplifier to be in the RF/keying 
>>> chain at any given time.  Has anyone interfaced the TenTec amplifiers or 
>>> the TenTec Antenna coupler to the K3 utilizing the unique 
>>> "key-in/key-out" technique particular to TenTec QSK operation?
>>>
>>> Please note that QSK operation is my main concern in interfacing these 
>>> units together.
>>>
>>> Ben,  K5EX
>>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: Elecraft at mailman.qth.net
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>