[Elecraft] K3: Item for 'Wish list ' maybe

[Greg - AB7R]

The K3 does not do this simply because there is a separate display for both VFOs 
and are shown at the same time.  So  you always know what your RX and TX 
frequencies are.  The K2 does this because it does not have a dedicated freq 
display for VFO B.

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Tue Nov 18 13:47 , David Pratt  sent:

>In a recent message, Bruce Fleming radio599 at q.com> wrote ...
>>                    *******************************************
>>I would like the VFO A display to always show the frequency that the K3
>>is using when operating split.
>>The VFO A should change to the TX frequency when I key down and jump
>>back to the RX frequency when I key up.
>>Thus, when operating CW on split, the screen would be flickering all
>>the time between the two frequencies.
>> 
>>I had this feature on my old Icom 735 and I am missing it on the K3.
>
>The K2 does this, Bruce;  it's strange that this does not happen with 
>the K3.  I agree it should go on the "wish list".
>
>73
>-- 
>David G4DMP
>Leeds, England, UK
>------
>
>
>_______________________________________________
>Elecraft mailing list
>Post to: Elecraft at mailman.qth.net
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft    
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com