[Elecraft] K3: in-band-IMD etc. what does this mean to a user?

[Geoffrey Mackenzie-Kennedy]

Fair enough, but if the sound card was being overdriven in their *two tone* 
tests, the same IMD products should appear in the two tone test trsults from 
all four types of receiver which is not the case. This assumes of course 
that the input levels to the sound card are the same plus minus a little 
during each test.

73,
Geoff
GM4ESD

----- Original Message ----- 
From: "hank k8dd" <k8dd at inbox.com>
To: "Ignacy" <no9e at arrl.net>; <elecraft at mailman.qth.net>
Sent: Thursday, November 13, 2008 5:07 AM
Subject: Re: [Elecraft] K3: in-band-IMD etc. what does this mean to a user?


And if you want to record your TX and RX audio it is very possible to
overdrive the sound card because the Line Out level is controlled by the AF
Gain control!

73    Hank    K8DD