[Elecraft] No On/Off for COMP & EQ?

[N8LP]

Hi Bill. I haven't tried your program with LP-Bridge, but I guess I should
in case I can improve cooperation of the two. FWIW, I am working on a number
of added features between LP-Bridge and PowerSDR. It's not at the top of the
list, but I plan to look at supporting the EQ interfaces of PowerSDR. 

73,
Larry N8LP
  




Bill Coleman  N2BC wrote:
> 
> There has been much chatter about the K3 EQ lately.  I've written a small
> Windows application that helps to 'manage' the equalizers.  This is a work
> in progress, and I'm not much of a programmer.  You should take this to
> mean: Caveat Emptor!
> 
> The application is being used by about 20 people now and I'm chasing a
> couple bugs.
> 
> 1) It does not behave well when access to the K3 is via N8LP's LP-Bridge. 
> This is NOT an LP-Bridge issue.  There is no direct way to read the EQ
> settings other than simulating button presses and reading the VFO B area. 
> The problem is that the EQ setting displayed on VFO B only appears
> momentarily and is then replaced with the 'label' for the EQ band. 
> Because LP-Bridge is polling the K3, my app will sometimes miss the data.
> 
> 2) The app is written in MS Visual Basic 2008 and requires ,NET Framework
> 2.0 or later.   If your system does not have 2.0, it will be downloaded
> from Microsoft.  While this is not in and of itself a problem, I do have
> one user that is having difficulty that looks like a problem in the
> Framework - something that may well be beyond my capability to resolve.
> 
> You can peek at the application and download it here: 
> http://home.roadrunner.com/~n2bc/SW.htm
> 
> I'm looking for ideas for impovement - some are proposed on the subsequent
> web page.  I am in the process of improving the overall communications
> error handling, improving the documentation, and looking at other ways to
> store the EQ settings.  No timetable for these as yet.
> 
> If this little utility is a help, great!  I would prefer that any
> communications regarding the program not be on the Elecraft reflector, but
> rather direct to me.   n2bc at stny.rr.com
> 
> THX & 73,   Bill  N2BC
> 
> 
> 
> 
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 

-- 
View this message in context: http://n2.nabble.com/No-On-Off-for-COMP---EQ--tp1472376p1477590.html
Sent from the Elecraft mailing list archive at Nabble.com.