[Elecraft] K3-Hardware agc mod and S-meter cal

[drewko]

Did you post these settings a while back? I know someone did, because
I had copied them into my K3. Only, I have them reversed: 017 and 016
respectively for the first two. It would be interesting to see what
others who are able to do the calibration come up with for these
settings.

73,
Drew
AF2Z


On Sat, 08 Nov 2008 11:26:51 +0000, Dave, G4AON wrote:

>Stewart I have a fairly good signal generator and didn't give it a 
>second thought as to whether doing the HAGC mod to my early K3 (serial 
>80) would change the S-Meter. However, the meter does calibrate nicely 
>and is accurate when calibrated. I've not re-checked the calibration 
>recently, but for what it's worth these are my settings:
>
>SMTR OF: 016
>SMTR SC: 017
>SMTR OK: OFF
>SMTR MD: nor
>
>73 Dave, G4AON
>K3/100 #80
>----------------------------------