[Elecraft] [K3] Switch Tone Volume

[W7TMT]

It works for me. I'm running firmware beta version MCU 2.63 - DSP 1.95. As I
crank up the Monitor Level the Switch Tones get louder. (In other words I
hold in the Mon/CMP/PWR knob until "MON" followed by its setting number
appears and then adjust that setting level and the Switch Tones follow
along.) If I reduce the Monitor Tone level to 0 (zero) the Switch Tones
can't be heard. 
 
Seems to work for SN 1889.
 
73/Patrick
W7TMT
  


  _____  

From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Roy Morris
Sent: Friday, November 07, 2008 8:49 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] [K3] Switch Tone Volume


I would like to know how the MONitor level is used to change the switch tone
volume.  When I change the MON level there is no change.  I have talked with
another K3 owner who also says his MON control does not change his switch
tone volume either.  We are both using v 2.63 firmware.  Maybe we are
overlooking something.  Please let me know if the switch tone volume can be
changed, and if so, how.   Presently it is low  and not very audible.
Thanks.  Roy Morris  W4WFB

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/elecraft/attachments/20081107/bc22c746/attachment.htm