[Elecraft] K3 Filter NORM

[GM0ELP]

Hi Rich,
    I don't use the XFIL button to normalise the DSP to the Roofing filter
because it works on a cyclic basis, where up to 5 presses would be required
(dependant on roofing filters installed) to achieve normalisation. Also, One
of the presets (I or II) is active at all times and therefore holds whatever
DSP adjustment you have just made and wish to normalise. This means you have
the following possible keys to normalised DSP to roofing filter :
 
1) the second preset
2) 2 norm memories
3) norm
 
To cut down confusion and for obvious reasons, I would like to use the
control with the 'NORM' decal to normalise the DSP, so this leaves:
 
1) 2 norm memories
2) norm
 
I am currently using the 2 norm memories for normalisation. I feel this
solution is not optimum for such a frequently used feature, as selecting a
norm memory is more complex than just selecting NORM, and you have to
remember what you saved in both memories.
 
73 Doug

-- 
View this message in context: http://n2.nabble.com/K3-Filter-NORM-tp1456939p1465683.html
Sent from the Elecraft mailing list archive at Nabble.com.