[Elecraft] K3 Band Stacking

[Phil & Debbie Salas]

Band Stacking:  I can tell you how it worked on the Yaesu MKV.  There were 
two "band stacking" registers per band.  When I'd push the band keypad 
button for a particular band, I'd go back to the frequency and mode I was 
last using on that band.  If I pressed that same band button again, I'd go 
to a second previously used frequency and mode in that same band.  If I 
pressed the band button again, I'd go back to the first frequency mode, etc.

So I set up one "push" for the CW end of the band, and the second "push" for 
the SSB end of the band.  The nice thing was that I'd go back to the 
previous frequency, not to a memory frequency, when I'd push the buttons. 
So I might be checking an SSB conversation occasionally, but spending most 
of my time on CW.  So just pushing the band button (a single push) would 
toggle me back and forth between the two frequencies.

Phil - AD5X