[Elecraft] Psk31 with K2

[Don Wilhelm]

Take a look at the Digital Interface box for the K2 on my website 
http://w3fpr.qrpradio.com and perhaps you can find some ideas.  The 
interfacing is not hard as long as you don't want extra 'whiz-bang' 
features that are included with the commercial models.
Also while at my website, take a look at the K2 Fixed Audio output.  If 
you find that desirable, Tom Hammond has boards that will allow you to 
mount it between the front panel and the control board.  See 
www.n0ss.net for more information on the fixed audio boards.

With the fixed audio piped to a spare pin on your microphone jack and 
the interface box, you can have just one cable to the K2 microphone jack 
for all your soundcard generated data modes.

73,
Don W3FPR

Yves Dussault wrote:
> I would like suggestions on interfacing the K2 and suggestions...
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG. 
> Version: 8.0.100 / Virus Database: 269.24.3/1472 - Release Date: 5/29/2008 7:27 AM
>