[Elecraft] K3 - HAGCMDKT mod kit

[N2TK]

Interesting that the mod levels of the board aren't reflected by the serial
number.  

Yes, I am waiting for the second receiver too. Going with the stock 2.7KHZ
filter for the moment as the main use I have for the second receiver is
listening to the "split" frequency.

73,
N2TK, Tony

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of F5VJC
Sent: Wednesday, May 28, 2008 1:01 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 - HAGCMDKT mod kit


I installed the HW AGC mod yesterday on K3 325, it was not fitted.
I opted for the SMD components, and all went fine but I decided to use the
standard LED as I was unsure of the cathode marking on the supplied SMD LED.
This ought to be indicated on the instruction sheet I think.

Also fitted the KXV3 RXA mod. All now back together and working just fine.

Waiting for the second RX now and debating filter options.

73
Deni, F5VJC



Went to install the HAGCMDKT kit on #311. Interesting but all was already
done except for shorting R33 and R40. Maybe there were interim fixes for
this mod?

By the way, C222 had already been changed to .1 uF for the CW Keying Rise
Time Reduction. I needed to add the RXA board to the KXV3.


N2TK, Tony
#311


-----
73, Deni F5VJC

K2 1188   K3  325 

For a Ham Radio friendly holiday in France...
Visit www.mycottageinbrittany.com
-- 
View this message in context:
http://www.nabble.com/K3---HAGCMDKT-mod-kit-tp17517042p17517381.html
Sent from the Elecraft mailing list archive at Nabble.com.

_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com