[Elecraft] K3 with Yaesu FL-7000 Linear Amplifier

[Joe Subich, W4TV]

> Thanks for the info Joe - unfortunately I don't have the FAS-1-4R

You don't need the FAS-1-4R for this.  The "K3" column is the 
DB15HD Accessory plug on the K3.  The FL-7000 is the 9 pin Molex 
connector on the FL-7000.  They should work very well together.  

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: charles [mailto:m0bin at m0bin.demon.co.uk] 
> Sent: Friday, May 23, 2008 1:52 PM
> To: microham at microham-usa.com
> Cc: elecraft
> Subject: Re: [Elecraft] K3 with Yaesu FL-7000 Linear Amplifier
> 
> 
> On Friday 23 May 2008 15:27:59 Joe Subich, W4TV wrote:
> > The FL-7000 should be a good match to the K3.  Try the following
> > cable:
> >
> >            K3          FL-7000
> >
> > Ground      5,12          1,7
> >  "D"       14             2
> >  "C"        9             3
> >  "B"        3             4
> >  "A"       13             5
> > TX GND     10             6
> >  INH        7             8
> >
> > Be sure to enable TX INH in the K3.  You will need to limit the 
> > K3 power output to prevent overdriving the FL-7000 until the 
> > negative ALC modification is available for the K3.
> 
> Thanks for the info Joe - unfortunately I don't have the FAS-1-4R
> 
> Charles - M0BIN