[Elecraft] K3 Mic Wiring

[David Yarnes]

The K3 is not wired for "generic" Icom mikes.  It most closely resembles 
Kenwood, except for the pin 5 and pin 6 thing, which apparently doesn't 
alter compatibility.  If your K2 was wired like an Icom, it's because 
someone did it that way.  The K2 allows you to wire for any pinout, and you 
use jumpers and/or jumper pins accordingly internally.

Dave W7AQK

----- Original Message ----- 
From: "John Seney" <john.seney at gmail.com>
To: <Elecraft at mailman.qth.net>
Sent: Thursday, May 22, 2008 7:22 AM
Subject: [Elecraft] K3 Mic Wiring


> Hi Folks:
>
> Curious if the mic wiring for a K3 is the same as the
> generic Icom HF rigs. I believe my K2 was like that.
>
>
> Tnx es 73,
>
> John Seney, WD1V
> john.seney at gmail.com
> http://www.wd1v.net
>
>
>
>
>
>
>
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>