[Elecraft] Xtal Filters

[Lyle Johnson]

> During a process of decreasing bandwidth while listening to an SSB signal, I
> would appreciate if a shift of the centre-freq of the DSP is not required
> 
> Any suggestion?

Use HI CUT/LO CUT instead of SHIFT/WIDTH in SSB.  As you adjust for best 
recovery, the 1.8 kHz filter will cut in when the difference between HI 
CUT and LO CUT is 1.8 kHz or less, and will be centered on the 
difference between them.

73,

Lyle KK7P