[Elecraft] Of possible interest Announcement - SteppIR FULL control with TRX-Manager

[VE3NFK]

Hi   - if this post is not acceptable - mods feel free to delete - my purpose
is not to offend or 'sell'

This is not directly related to the K3 - which I am very happy with - but
TRX works with the K3 AND my SteppIR - so thought it might be of interest...
also - my next project is to get Laurent F6DEX to
FULLY - and I mean FULLY implement all the possible controls of the K3.
so:

Laurent, the author of 'TRX-Manager' just made the following post on the 
TRX-Manager Yahoo group:  http://groups.yahoo.com/group/TRX-Manager/

"TRX-Manager V 4.2.1 is ready. Main change is addition of a
comprehensive SteppIR control Interface (STEPPIR protocol). Please see the
help for setup (important information to be read).
Special thanks to John VE3NFK for testing and Jim @ SteppIR for support."   
www.trx-manager.com

This new addition to TRX gives you full control of the SteppIR - beam and
vertical from your computer screen - including 'home'  and 'calibrate' at a
button press - something I have wished for a long time.

It is not perfect - as the SteppIR RS-232 protocol is not a complete set
because there is not enough memory left to get it all in  - but it works
very well.

TRX is not free - but does have a 30 day trial.


Disclaimer:  I have no financial interest in TRX - but Laurent is a friend
and I am a Alpha tester.

73  John VE3NFK
-- 
View this message in context: http://www.nabble.com/Of-possible-interest-Announcement---SteppIR-FULL-control-with-TRX-Manager-tp17285925p17285925.html
Sent from the Elecraft mailing list archive at Nabble.com.