[Elecraft] Heil Proset Plus and K3

[Bruce McLaughlin]

Well, I don't know.  I also have a non electret version which I use with my
FT 1000D.  Maybe it would be interesting to try it on the K3 with the bias
turned off just in case.  I suspect the gain might be lower but I would be
mainly concerned about whether it might short something that shouldn't be
shorted.  I don't recall whether the non-electret Proset came with a
connector schematic or not.  Maybe someone else on the forum has already
tried this with the K3.  If so and the radio is still working I guess that
would be reassuring.

Bruce - W8FU

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Vic K2VCO
Sent: Thursday, May 15, 2008 6:47 PM
To: craig at powersmith.net
Cc: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] Heil Proset Plus and K3

Craig D. Smith wrote:

> This thread originally was focused on the IC (electret) version of the
> Proset Plus.  I was thinking of getting the normal (dynamic) version and
> plugging it into the connectors on the back.  So humor this basic question
> from a CW guy.  Is there any advantage to the electret version assuming I
> have no other rig that needs it?  The dynamic version is less expensive.

Well, I haven't tried the electret version but I have the dynamic Proset 
5 and it works fine (at least, for the few SSB QSOs I felt obligated to 
make as a beta tester).
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


-- 
No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.23.16/1445 - Release Date: 5/15/2008
7:25 PM