[Elecraft] K2 - KIO2 stop bit oddity

[Ian J Maude]

Joe Planisky wrote:
> Well, that's just it: you can't change it on the K2, and the KIO2 
> manual says it should be 2 stop bits.
You will normally find that 4800 baud tends to be set to 2 stop bits but 
everything else appears to be 1.  I don't know why this is but it seems 
to be the norm.

Ian
>
>
> 73
> Joe KB8AP
>
> On May 14, 2008, at 1:43 AM, Larry Clay wrote:
>
>> One stop bit is the normal default for most programs for serial 
>> communications. Hyperterminal in Windows XP defaults to this. Also 
>> the KIO2 manual says that one stop bit works also. The main thing is 
>> that both the K2 and control program are set the same.
>>
>> Larry
>> KB5DXY
>>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft  
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>


-- 

Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455