[Elecraft] KX1: need some help...

[Tom Pallen]

I'm having a number of problems with KX1 options and I'm hoping to 
get some guidance from the reflector participants.

The KX1 went together w/o a hitch. Performance matched my Elmer's old 
rig and life was good. Then came the 3080 option that required 
re-work. I followed the instructions and now there are problems.
    * Can't Rx any signals at all. Not even WWV. But the Elecraft 
signal generator can be heard on it's specific frequencies at both 50 
and 1 uV.
    * U6 can cook eggs on Rx!!
    * I checked the DC Voltages per pages E-5 and E-6 and found:
        * U1 pin 14 at 5V not 0.0
        * U1 pin 15 at 5V not 0.0
        * U2 pin 14 at 2.5V not 0.0
        * D3 Anode a 11.7V not 9.0
        * Others not checked because they are hidden by the 3080 board.
I'm open to any and all suggestions.

Thanks,

Tom (taking the test(s) later this month) Pallen