[Elecraft] E00005 err vco sub

[Don Wilhelm]

Ron,

Does your K3 have the subreceiver installed?  I do not think they have 
shipped yet because they are waiting for the shields (they will go out 
to the field testers quite soon). - so since you cannot have the 
sub-receiver installed, to see an error for the sub-receiver VFO is 
natural and to be expected.

73,
Don W3FPR

Ron Spencer wrote:
> Trying to calibrate my newly finished K3. Downloaded newest firmware and can
> calibrate the VCO for the primary VFO but fails the sub. 
>
> Also zero output on 6. 
>
> Firmware: 1.88
> FPF .01
> DSP1 1.70
> DSP2 1.70
>
> Can transmit and receive fine on main VFO (except of course for 6).
>
> Any help would be appreciated.
>
> Thanks
> Ron
> N4XD
>
> No virus found in this outgoing message.
> Checked by AVG. 
> Version: 7.5.524 / Virus Database: 269.23.14/1425 - Release Date: 5/9/2008
> 12:38 PM
>  
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG. 
> Version: 8.0.100 / Virus Database: 269.23.15/1426 - Release Date: 5/10/2008 11:12 AM
>