[Elecraft] Bluetooth to RS232

[Ed K1EP]

At 5/9/2008 07:22 AM, Dr. Werner Furlan wrote:
>hi all,
>
>On 8 May 2008 at 5:43, Mike Scott wrote:
>
> > I liked the K2 Bluetooth serial adapter project.
> >
> > I Googled Bluetooth serial adapters (there are quite a few) and ran
> > into an A7 Engineering product.
> >
> > http://www.a7eng.com/products/embeddedblue/serial/eb501-SER.htm
> >
> > It is lower cost than the Socket Bluetooth adapter.
> > It looks ready to embed (doesn't have to be disassembled). It needs an
> > antenna. I wonder how I would mount an antenna on a K3; if it were
> > internal it seems to me that the case would severely impede signal.
>
>I use the Blue Air adapter from Lynn Hansen KU7Q.
>http://www.lynovation.com/
>
>and was available as a kit some time ago.
>there is some information on his homepage how to build one yourself.
>
>There is a Pocket PC program to remote control the transceiver.
>Works good with the K2, I did not yet plug it into my K3, but should behave
>the same.

What is the latency and does it support control lines (DTR, CTS, etc.)?