[Elecraft] K2 troubles

[Don Wilhelm]

Scott,

Did you take good care to observe proper anti-static measures (wrist 
strap and anti-static pad) when handling and installing the new 
microprocessor?  If not, the new microprocessor may have been damaged.

Try putting the old on back in (observing antistatic precautions) and 
see if it restores proper operation - you will, of course, have the 
original problem back.

73,
Don W3FPR

Scott McDowell wrote:
> Hello
>
> My K2 has worked really good since I finished
> building and trouble shooting it about three
> weeks ago. It had excellent receive and transmit
> and everything worked fine except for one thing.
> The low battery info message kept coming on
> every eight minutes.
> I should have left it like that, but the message
> got to bugging me so I ordered another
> micrprocessor (ctrl board U6) and installed
> it. The microprocessor was only six weeks
> older than the original one, so I thought that
> all I would  have to do is swap them out.
> (Wrong)
> Since I installed the new  microprocessor three
> days ago nothing works except the display.
> No sound and no transmitt.
> Now, three days later the display has started
> acting up. It doesn't work on forty meters, but
> works on the other bands, at least for now.
> I was very careful to install it correctly with
> no bent pins.
> Could this be another bad microprocessor,
> or could something else be causing all
> these problems?
> Anyone have any ideas?
> Thanks
>
> Scott N5SM
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG. 
> Version: 8.0.100 / Virus Database: 269.23.9/1419 - Release Date: 5/7/2008 7:46 AM
>