[Elecraft] K3 Vox works here

[Mike Scott]

I read the posts about VOX breakage in the most recent firmware so I decided
to test mine. Mine seems to work okay.

VOX gain = 76 Anti VOX = 30

$10 ham fest mic (Hisonic HM800) connected to rear panel, RPH mic gain = 30

Good audio reports on this mic by the way. It comes with a cheap XLR
connector/cable that could probably use an upgraded connector. I find that
the connector contacts are a bit loose. No PTT, here is what it looks like: 
http://www.hisonic.net/HM800.htm
I have seen them at two swap meets (Pacificon, TRW) for $10.


Mike Scott - AE6WA
Tarzana, CA (DM04 / near LA)
K3-100 #508/ KX1  #1311