[Elecraft] Re: Upgrade Firmware/ Revert back

[Ed Cox KE3D]

The upgrade problem was solved thanks to Wayne.  Several of the new 
features seem to be working.  There are so many new bells that I will 
need several days to check thru them.

Basically I did two things for a successful upgrade.  I suspected a 
problem going thru the MKII with "No Radio and No Polling".  So I 
switched to another USB to serial interface.   That was one 
thing.  The other was I deleted all of the upgrade files (possible 
corruption??) and downloaded new files to transfer with the K3 
Utility.  I uploaded the 1.88/1.70 set and re did the  VCO CAL.   It 
runs from 1 to 50 at about a second per count. then a variable speed 
from 50+ to 127+.  No errors on Tech MD exit or on the next power cycle.

It works like a charm now and tickled pink with the K3 again.

Regards and again thanks to Wayne for his help.

Ed KE3D


-- 
No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.23.9/1417 - Release Date: 5/6/2008 08:07