[Elecraft] K3 SSB Output Greater on USB

[Mike]

I also find USB gives a greater peak output than LSB, filter 2.7k. Hope this 
can be fixed.
Peak power output still only about 80 watts with CONFIG: TXG VCE set to +3dB 
but if this means the output is very clean, I can live with this lower 
output power.

Mike G8ALS
----- Original Message ----- 
From: "Roy Morris" <w4wfb at carolina.rr.com>
To: <elecraft at mailman.qth.net>
Sent: Tuesday, May 06, 2008 1:14 PM
Subject: [Elecraft] K3 SSB Output Greater on USB


I find the SSB peak output greater on USB than LSB.  This anomaly occurs on 
all bands and can be as much as approximately 15 to 25 watts peak difference 
depending on band.  I hope this can be corrected in firmware.  Roy Morris 
W4WFB  K3  #323
_______________________________________________
Elecraft mailing list
Post to: Elecraft at mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 269.23.9/1416 - Release Date: 5/5/2008 
5:11 PM