[Elecraft] VOX sensitivity problem with new firmware

[Gil Cross]

Subject: RE: [Elecraft] VOX sensitivity problem with new firmware

        I too noticed a large change in setting up TX power control with the 
new firmware.
        Now am running mic at 15, cmp at 5 and vox gain at 70 in order to 
have smooth operation.
        txg vce is now .5dB.
        These settings are greatly different  than my previous settings.
        Had trouble keeping the alc in range with the mic gain and so had to 
go to the rather high vox gain. This certainly seems to indicate less audio 
signal is being generated to drive the following circuitry. Seems to be 
working fine at the new settings but haven't yet been able to have another 
station tune through my signal to see if I have any whiskers......

        Take care  73   Gil   K8EAG