[Elecraft] K3 Firmware Download Problems. Hopefully solved.

[David Yarnes]

Gads!  I never would have thought of trying that!  I can't wait for someone 
to give a logical explanation of what the problem could have been.  I'm 
afraid all that tells me is that the wall socket you were using initially 
may have a problem.  Have you checked it?

Dave W7AQK

----- Original Message ----- 
From: "Mike" <mhutchins at clear.net.nz>
To: <elecraft at mailman.qth.net>
Sent: Sunday, May 04, 2008 6:22 PM
Subject: [Elecraft] K3 Firmware Download Problems. Hopefully solved.


> Some readers may recall my ongoing problems loading new firmware to K3 
> #0215.
>
> I *may* have solved this problem.........During problems with the 
> 01.78/01.58 download, I changed the physical config of my K3 & PC.  - They 
> had been plugged into 2 different wall sockets in the shack. I moved the 
> Ks & its power supply into the same socket as my PC & the 01.78/01.58 
> download then worked well.   Yesterday I downloaded 01.87/01.69, using 
> this same config, & all went well.
>
> It may not be a cure-all for everyone's problems, but could be classed as 
> 'one more thing to check' & has been reported to K3Support.
>
> 73 de Mike, zl1mh.
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>