[Elecraft] Re: losing FL5

[Eric]

At 19:06 4-5-2008, you wrote:

>Hi Eric,
>
>This should not have happened. You may need to re-set the filter's 
>center frequency using the FL5 FRQ menu entry. Typically the 200-Hz 
>filter has an offset of around -0.90 kHz.
>
>Also make sure that FL5 BW is set to 0.20, and that you have REFCAL 
>properly calibrated against a reference signal.


Hi Wayne,


After some filter swapping, it looks like the 200 Hz filter is dead. 
It wasn't during the ARRL CW test, last time I used it, so I guess 
it's a coincidence and has no connection with the software changes.

vy 73 Eric PA3CEV


PS: no visual problems on the 200 Hz board, all leads are clipped 
short etc. Anything I could do myself?









-- 
No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.23.8/1413 - Release Date: 3-5-2008 11:22