[Elecraft] KAT3

[Blachura]

Hi Gary,
I just used my KX1 on a mini trip. Used a endfedz dipole for 80/40/20.
Worked great with the kx1. Used a small coax from the rig and ran the dipole
up into a low tree using my shoe as a weight to get it up there HI HI. (got
the shoe back ). the dipole is about 80ft long. and I had a very low swr
with the rig.
You can check it out on web. 

http://www.parelectronics.com/pdf/EF10-20-40.pdf



Don...w2xb





Gary Gregory-3 wrote:
> 
> I have been carefully reading the instructions on the configuration and
> use
> of the KAT3 and I am a little puzzled by what I have found.
> 
> I was surprised to find that the KAT3 does not track the VFO on receive. I
> wonder if there is a reason for this?
> 
> Has there been any thought on perhaps an upgrade of the KAT3 in the
> future?
> 
> I have mono band antennas but the band edges are sometimes a little higher
> than say the band centre and CW portions. Tracking on receive is something
> I
> have become used to with previous radios.
> 
> Still learning how this radio works, all reports so far have been
> exceptionally good. i just had a QSO with a station who asked me if I
> would
> like to swap it for his SteppIR beam and an FT1000...been there, done
> that,
> the K3 stays.
> 
> Cheers all,
> Gary
> #679
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
> 
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
> 
> 

-- 
View this message in context: http://www.nabble.com/KAT3-tp17033515p17033731.html
Sent from the Elecraft mailing list archive at Nabble.com.