[Elecraft] Squelch
KJ3D
kj3d at comcast.net
Thu May 1 17:45:43 EDT 2008
Thanks, Joe -
for looking this up for me. We must have different editions of the K2
manual - info is on page 103 of mine. I swear, however, that I looked
there. I must have turned two pages and skipped over it.
Anyway, I've learned something new today. Thanks.
Have a good one,
73,
Tom KJ3D
-----Original Message-----
From: Joe Planisky [mailto:jplan at jeffnet.org]
Sent: Wednesday, April 30, 2008 11:14 PM
To: KJ3D
Cc: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] Squelch
Hi Tom,
Yes, the K2 has a Squelch feature. It's accessed through the secondary menu
(tap MENU, then tap DISPLAY). Squelch (SLCH) is the
first item on the secondary menu. See page 100 in the K2 manual.
73,
Joe KB8AP
On Apr 30, 2008, at 6:54 PM, KJ3D wrote:
> Hello Group,
>
> I recently installed HSE software and ran into an interesting problem.
> The folks at Callsign Software couldn't provide a solution, so here I
> am.
>
> After the installation, when the K2 was powered up, it would do so
> with no audio - but otherwise apparently working fine. A touch on the
> key or PTT switch brought it back to life, but only for 10 seconds).
>
> Somehow, the HSE program turned squelch full on on my K2 (ser 4991
> with SSB and DSP).
>
> I cannot find a reference to squelch anywhere in the Elecraft
> literature, including how to turn it off.
>
> I did get it off, but it required installing HRD and installing all
> the sliders. One is for squelch and it was full on. Turning it off
> and exiting the program solved the problem.
>
> My question is...
>
> What's the story on squelch? Is there one? How does one access it -
> specifically how do you turn it off if it gets turned on by a third
> party?
>
> TIA,
>
> 73,
>
> Tom, KJ3D
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
More information about the Elecraft
mailing list