[Elecraft] K3 TCXO calibration

[Don Wilhelm]

Evert,

You did not spot the Firmware Notes entry in the Errata sheet.  That 
calibration method is not yet implemented.  Use one of the other methods 
for the time being.

73,
Don W3FPR

Evert Bakker (PA2KW) wrote:
> Good day to all,
>
> First of all:
>
> K3 (812) arrived.
> Ordered 21 Nov 2007
> Order confirmation 22 april
> Sent 24 april
> Arrived 28 april
> Let's see if reality meets expectations....(I'll let you know)
>
>
> I've finished the building procedure and in the process of calibration.
> When calibrating the TCXO (1 ppm) you are told to locate CONFIG:REF CAL
> menu.
> No problem so far. The next sentence tells me to tap [1] to change the name
> to REF xxC. I'm tapping [1], but I'm getting the message "b set".
> What am I doing wrong here? (see page 47 right column at the bottom of the
> owners manual)
>
> Thanks for replying in advance.
>
> 73's, Evert PA2KW
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
>