[Elecraft] K2/100 amplifier keying

[Ken Wagner K3IU]

This is from the KPA100 Parts List...
Q9 - 1 - Transistor, HEXFET, 500 V, IRF830 or IRL620, TO-220 (tab may be 
cut)
It keyed my SB-220 with no problem. If I remember correctly, that is 
about 100VDC.
73,
Ken K3IU

Bill Stacy wrote:
> Message: 12
> Date: Sat, 29 Mar 2008 19:15:41 -0700
> From: Phil Kane <k2asp at kanafi.org>
> Subject: Re: [Elecraft] Key Line - My Mistake
> To: Elecraft <elecraft at mailman.qth.net>
> Cc: Jim Miller <JimMiller at STL-OnLine.Net>
> Message-ID: <47EEF7CD.6070405 at kanafi.org>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> On 3/29/2008 4:57 PM, Jim Miller wrote:
>
> That is for the K3.  The original question - and the one that I have - 
> is for the K2/100.  Are they the same?
>
> 73 de K2ASP - Phil Kane
> Elecraft K2/100   s/n 5402
>
> -----------------------------------------------------------------------
>
> Hi, Phil:
>
> The answer is not easy to find.  It's in the K2/100 manual (p. 59): 200 VDC
> @ 1 Amp.  I'm going to try this with an old Collins 30L-1 this afternoon,
> and I will keep my fingers crossed that the answer is correct.  :-)
>
> 73, Bill, N5TU
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft    
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>