[Elecraft] K3 - ERR PL1

[Mike Harris]

Good day,

Recently I noticed a brief flash of ERR PL1 when changing from 17M to 15M. 
It happened maybe a dozen times.  Not noticed before, not noticed since. 
I didn't record the exact frequency this was happening on.

PLL 1 voltage on 15M:

21.000  5.2
21.050  5.5
21.100  5.8
21.150  6.0
21.200  6.3
21.250  6.6
21.284.399  6.9
21.284.400  2.4
21.300  2.4
21.350  2.5
21.400  2.7
21.450  2.8

Looks like there is a VFO range switch near the middle of the band.  I 
assume this is normal.  I just might have been right on the transition 
point, though I believe I altered the tuning to see if the RX was working 
OK between tests.

Regards,

Mike VP8NO